The size of the male dignity troubled the representatives of the stronger sex since ancient times.The confirmation of this is a found artificial member that, according to historians, is at least 28,000 years old.It was discovered in archaeological excavations in Germany - a country that is considered a pioneer and leader in the field of porn industry.
In order to change the size of the penis, with various methods - from the use of special medicines, the use of ointments and creams, the implementation of stretch massages to surgical operation is possible.However, nozzles for the genital organ, which can be bought both in toys for intimacy and with its own hands, are popular.
Is it possible to make a member nozzle yourself?
The Internet is full of inquiries "How to make an artificial cock with your own hands".Increased interest is simply explained: The models presented in the branches are high and expensive, and those who have a low price do not differ in high quality.If you want to try out a sex toy, a dilemma is born: is it necessary to pay for the goods if there is no trust in its further use?
Finally, it can turn out that the girl does not approved the presence of the nozzle or that she will cause her symptoms, irritation or pain (the latter is not excluded for men).If you choose a cheaper option, there is a risk of irritation due to a possible allergic reaction to the toy or the violation of the genitals due to the broken or peelized parts of the nozzle.
It is also possible if you want to try "here and now", but there is no time to wait for an order from the Internet, and there is no way to visit the next sex business.In such situations, the question is how to make a dildo or a member nozzle at home.
When you look at the product, it becomes clear that it is quite difficult to construct it, but not impossible.The main thing is to have a wish and a short time and to buy the required materials.The latter depends on the final quality of the resulting object.The advantage of a homemade member is that its shape and size are limited exclusively by the author's imagination.
The choice of suitable material
For nozzles and artificial members who are manufactured under industrial conditions, use:
- Cybercro is a material that is almost similar to the real skin of a person.It is soft, sensitive, practically not distinguishable from the living meat, because when touching the body it quickly takes its temperature and keeps it throughout the entire time to stay on the organ.The disadvantage of the material is very susceptible to damage.Therefore, it requires careful handling, washing in warm soap water, storage in a special case.
- Polyvinyl chloride is a material that is most popular for the production of dildos and sex toys.His advantages: the ability to quickly grasp the shape of the human body, strength and combination with lubricants.PVC is washed with soft cleaning agents: soap, shower gel or intimate hygiene, does not require any special storage conditions.The application is possible with every frequency and intensity.
- Silicone is a medical material that is used in 90% of cases to produce intimate goods.It is soft, flexible and quite elastic.It is able to quickly accept the shape of the body and to return to its original state after "work".Advantage: Hypoallergenicity that enables the operation of all toys with every intensity.Store nozzles of silicone in a dark place, because it is destroyed under the influence of ultraviolets.The disadvantage - this requires the processing of lubrication and only on a water -based.
- Rubber is a specialized material type with increased thermoplastic properties and comfortable.Suitable for the creation of products that have to be given and serviced.The softness of the material enables you to make it comfortable for both partners and elasticity - in order to obtain the required parameters (length, thickness, ribs, pimples, etc.).The nozzles of a rubber member do not rub and do not cause allergic reactions.Not aggressive cleaning agents or special cleaning staff are used for intimate toys for care.
- Plastic is a dense material in which special mixtures are added to more softness and elasticity.Is used for the production of nozzles of special shapes.
The selection of the material is the most important phase in the production of dildo with your own hands, since the final version of the product and its safety for the health of both partners depend on it.It is therefore extremely undesirable to save in this case.
Types of materials
Before making the phallus at home, you should clarify which of these materials is available to the manufacturer.Some of them are available in free sale in construction shops, others when ordering over the Internet.
So they are suitable for the production of a gravity from home:
- Alginate form;
- Silicone form;
- Bend of the polyurethane mass.
Other options may be offered in the shop, but before you buy them, you should find out whether the material causes allergic reactions and how safe it is for the body.
Stages
How do I do a dildo at home?It will be necessary:
- Flexible transparent plastic;
- Adhesive tape (adhesive tape);
- selected material;
- Food film.
A square or a rectangle is cut out of the plastic film - depending on the size the product is planned.The length of the leaf is regulated at will - the more centimeters the man wants to add, the longer it is.The width of the leaf depends on the existing parameters of the penis: in an upright state it should go easily and have free space.To make a homemade member for the size, it should be:
- Measure it with an inch band;
- Add the right amount of centimeters to the results;
- Cut off the desired width.
Error: To wrap the plastic film to wrap the penis and cut it down "to the eye" - such a phallus that was made by itself will either be small or too big.
When it is ready with dimensions and cutting, the sheet is turned with a tube, the joint of the edges is firmly defined with adhesive tape.A circle is cut out of the plastic, which closes one of the holes and is also firmly wrapped in tape.The task is to make the received pipe completely tight.
The second phase of the process "How to make a dildo" flows.For this, an upright penis is firmly wrapped in the clammy film in order to exclude the contact of the mass with the body.If the task is to create a smooth nozzle, you have to wrap it carefully, except all possible irregularities, since the smoothness of the inside of the future nozzle depends on it.
Next, the shape mass is poured into the prepared pipe and the penis is lowered there.The solidification process takes an average of 15 minutes, according to which the structure is removed from the penis.Now you can carefully remove the adhesive tape and free the product from the plastic frame - a phallus made at home is ready for use.
If the type wants to give the toy an anatomical shape, this can be done with a knife and abrasive materials.They are easy to create, to make different rock records, ribs, antennas and other "chips" of nozzles.
Risks
Before you make a member of improvised materials with your own hands, you must take serious health risks into account that are inherent in domestic toys for sex:
- Robben, sharp or poorly processed edges, corners, forefrises and other defects in a homemade toy can provoke the genitals of both partners' genitals.
- Incorrectly calculated size threatens the loss of the nozzle in the intimacy process;A more serious option - it can get stuck in the body of a woman;
- If the calculations were carried out in a state incomplete erection or they were lost at the time of the solidification of the mass, there is a risk that it does not work to remove the nozzle without medical care.
- Violation of the tightness of wrapping a member with a film can cause masses in the urethra, which causes an inflammatory process or a blocking of the urethra.
- Keeping a member of a state of full erection for 15 minutes is a difficult task for the solution in which men take medication with phosphodesterase inhibitors with serious side effects for internal organs.
After you have evaluated and weighed all sorts of risks, you are suitable for independent production of dildos and nozzles responsibly and carefully and all levels are carried out carefully and precisely.
What should you do artificially phallus
It is easier to make a phalloimitator directly at home, i.e.H. Artificial member.Such toys are preferable for women, and if the girl wants, it can be left outdoors.They are suitable for the production of dumplings:
Plaster
It is sold freely in a supermarket, pharmacy or children's toy business.After the mass is prepared (the rules for working with the plaster are in the instructions embedded in the package), a member of the desired size is decorated and can dry completely.After it was processed with sandpaper to eliminate all bumps.A condom is placed on the phallus before love games.
The use of a plastic plaster mixture is also possible for the production of nozzles: a member that is completely built and wrapped in a film is covered and hardened with a plaster mix.However, such a toy will be very rigid, and this property causes discomfort, pain and inconvenience.His second disadvantage is the fragility.
Silicone mix
Another option for filling it is in the form of the previous vibrator.This means that if the toy has already been bought (or the packaging was accidentally received from friends), the silicone mass can be poured into a plastic shape, which is previously lubricated with vegetable oil for free extraction at the end of work and can stick the halves with super glue after the eruption.
Adhesive can provoke the strongest allergy, so games with such an artificial member are only recommended with a rubber product No. 2.
wax
This material is available in 90% of cases and everywhere, while it has advantages:
- Easily assumes the desired shape;
- has a characteristic aroma;
- In the absence of allergies against building bubbles, a woman can insert into the body without a condom (it is enough to treat it with fat).
The wax candle heats up, the necessary dimensions of the length and width are given, if desired, additional stimulating runs, spikes, ribs, etc.
plasticine
This product for the creativity of children can be used in the same way as wax, but it is worth considering that it is more plastic, and therefore it can easily lose its shape in the middle of the sexual contact.A simple pencil is able to make a more stable toy that is placed in a blurry artificial member or temporary freezing of the phallus.
Improvised means
You can make a nozzle for a penis yourself, but this process is not quick.If the wish of the experiments suddenly arose and there are no special toys at hand, you can use improvised agents.How can you replace a member?
- Vegetables and fruit.In almost every refrigerator there are gifts of nature that have the shape of a phallic symbol.An ideal and affordable option - cucumbers and bananas that bring their bowl into intimate games in a chilled form.
- Mobile phones.We speak of small models that can be placed on vibration.
- Electric razor.A cutting block is previously removed from her.
The alternative serves as a comb with a long and wide pen, curling for curling and other things of a phallic shape without sharp corners and prey.The main condition for your application: rinse into water and create a condom.
Games in bed with nozzles, artificial members and lubricants are asked to make diversity and sharpness into the couple's everyday life.Before it replaces a member with an artificial copy, it is worth coordinating this problem with a lover, otherwise a romantic evening can end sadly: a serious argument or a painful break.